blueway air conditioner instruction manual

In some cases, it boils down to user error - do you know what buttons to push? Inadvertently pressing the wrong button on the remote control can cause a few problems, such as the motion-detection capabilities where the system will turn off if no one is in the room to save energy. Slide the back cover off again, remove batteries and clean out any dirt or dust on the contacts using a cotton swab dipped in isopropyl alcohol. If it still doesn’t work even after inserting the batteries the right way, there could be dirt or blockage between the batteries and the metal contacts.Remove the batteries and reinsert them according to the correct polarities instructed inside the battery chamber.If it’s anything other than what is instructed, the remote won’t work. These symbols indicate how to insert the batteries and which way they are facing.It is either printed or embossed “+” and “-” symbols and usually outlines the battery. You’ll find the polarities inside of the battery chamber on the back of the remote.If you’ve just popped in new batteries and it still doesn’t work, slide off the back cover and check the polarity. When this icon appears, it’s time to change the batteries. On most system remote controls, when the batteries are flat, a message will be displayed on the remote controller display.If this doesn’t work, chuck out the old batteries and replace them with new ones.Turn over the remote control and slide the back cover off.Just like how you’d open up the back of a TV remote to rearrange the batteries, the same can be done with the AC remote. Simply give it a quick wipe with a damp cloth or antibacterial wipe. Ensure the sensors on both the remote and air conditioning system don’t have any dirt or grime on them as it can prevent the signal from being received.

There needs to be a clear path from the sensor on the remote control to the unit’s interface. Make sure there’s no furniture between you and the units interface.Move a little closer to the unit and try pressing the on button again.

In some cases, certain systems require a minimum sensor distance of 6 metres or so. When you point the remote control at the AC system and press the on button with no response, you might be too far from the unit.

Blueway air conditioner instruction manual